1 copyright ? 2010, everlight americas all rights reserved. release date : apr.30.2014. issue no: xxx xxxx www.everlight americas .com smd ? side view leds eapl4040ga0 - am preliminary features ? p - lcc - 4 package. ? colorless clear resin. ? wide viewing angle 120 o . ? inner reflector and white package. ? bri ghtness: 560 to 90 0 mcd at 2 0 ma ? precondition: bases on jedec j - std 020d level 2 ? qualificati on according to aec - q101 rev c. ? automotive reflow profile (ir reflow or wave soldering) applications ? automotive backlighting or indicator : dashboard, switch, audi o and video equipmentsetc. ? backlight : lcd, switches, symbol, mobile phone and illuminated advertising. ? display for indoor and outdoor application. ? ideal for coupling into light guides. ? substitution of traditional light. ? optical indicator.
datasheet smd ? side view leds 57 - 1 1 - ghc - r1u2v1a7e - bt8 - am 2 copyright ? 2010, everlight americas all rights reserved. release date : apr.30.2014. issue no: xxxxxxx www.everlight americas .com device selection guide chip materials emitted color resin color ingan brilliant green water clear absolute maximum ratings (ta=25 ) parameter symbol rating unit r everse voltage v r 5 v forward current i f 3 0 ma peak forward current (duty 1/10 @1khz) i fp 100 ma power dissipation pd 95 mw junction temperature t j 125 operating temperature t opr - 40 ~ + 100 storage temperature tstg - 40 ~ + 110 thermal resistanc e rth j - a 6 00 k/w rth j - s 4 00 k/w esd (classification acc. aec q101) esd hbm 2000 v esd m m 200 v soldering temperature t sol reflow soldering : 260 for 30 sec. hand soldering : 350 for 3 sec.
datasheet smd ? side view leds 57 - 1 1 - ghc - r1u2v1a7e - bt8 - am 3 copyright ? 2010, everlight americas all rights reserved. release date : apr.30.2014. issue no: xxxxxxx www.everlight americas .com electro - optical characteristics (ta=25 ) par ameter symbol min. typ. max. unit condition luminous intensity iv 560 ----- 9 00 mcd i f = 2 0ma viewing angle 2 1/2 ----- 120 ----- deg i f = 2 0ma peak wavelength p ----- 518 ----- nm i f = 2 0ma dominant wavelength d 522 ---- 531 nm i f = 2 0ma spectrum r adiation bandwidth ? ----- 3 5 ----- nm i f = 2 0ma forward voltage v f 2.7 ---- 3.8 v i f = 2 0ma note: 1. tolerance of luminous intensity: 11% 2. tolerance of dominant wavelength: 1nm 3. tolerance of forward voltage: 0.1v bin range of luminous intens ity bin code min. max. unit condition u 2 560 710 mcd i f = 2 0ma v1 710 900 note: tolerance of luminous intensity: 11% bin range of dominant wavelength bin code min. max. unit condition 1 522.0 526.5 nm i f = 2 0ma 2 526.5 6 3 1.0 note: tolerance of dominant wavelength: 1nm
datasheet smd ? side view leds 57 - 1 1 - ghc - r1u2v1a7e - bt8 - am 4 copyright ? 2010, everlight americas all rights reserved. release date : apr.30.2014. issue no: xxxxxxx www.everlight americas .com typical electro - optical characteristics curves typical curve of spectral distribution relative intensity (%) p (nm) note: v()=standard eye response curve; i f = 2 0ma diagram characteristics of radiation relative intensity (%) relative intensity
datasheet smd ? side view leds 57 - 1 1 - ghc - r1u2v1a7e - bt8 - am 5 copyright ? 2010, everlight americas all rights reserved. release date : apr.30.2014. issue no: xxxxxxx www.everlight americas .com relative luminous intensity vs. forward current ( ta=25 forward current vs. forward voltage (ta=25 ) do minant wavelength vs. forward current (ta=25 ) forward current (ma) dominant wavelength (nm) forward voltage (v) forward current (ma) relative luminous intensity vs. forward current ( ta=25 ) max. permissible forwarded current ( ta=25 ) relative luminous intensity forward current (ma) forward current (ma) temperature ( ) 1 10 100 2.5 2.6 2.7 2.8 2.9 3.0 3.1 3.2 3.3 3.4 3.5 525 526 527 528 529 530 531 532 533 534 535 536 537 0 10 20 30 40 50 60 70 80 90 100 0.01 0.10 1.00 10.00 1 10 100
datasheet smd ? side view leds 57 - 1 1 - ghc - r1u2v1a7e - bt8 - am 6 copyright ? 2010, everlight americas all rights reserved. release date : apr.30.2014. issue no: xxxxxxx www.everlight americas .com package dimension note: tolerances unless mentioned 0.1mm. unit = mm
datasheet smd ? side view leds 57 - 1 1 - ghc - r1u2v1a7e - bt8 - am 7 copyright ? 2010, everlight americas all rights reserved. release date : apr.30.2014. issue no: xxxxxxx www.everlight americas .com moisture resistant packing mater ials label explanation ? cpn: customer s product number ? p/n: product number ? qty: packing quantity ? cat: luminous intensity rank ? hue: dom. wavelength rank ? ref: forward voltage rank ? lot no: lot number reel dimensions carrier tap e dimensions: loaded quantity 5 00 pcs per reel note: tolerances unless mentioned 0.1mm. unit = mm
datasheet smd ? side view leds 57 - 1 1 - ghc - r1u2v1a7e - bt8 - am 8 copyright ? 2010, everlight americas all rights reserved. release date : apr.30.2014. issue no: xxxxxxx www.everlight americas .com moisture resistant packing process note: tolerances unless mentioned 0.1mm. unit = mm precautions for use 1. soldering condition (reference: ipc/jedec j - std - 020d) 1.1 (a) maximum body case temperature profile for evaluation of reflow profile ( b) recommend soldering pad note: tolerances unless mentioned 0.1mm. unit = mm 0 50 100 150 200 250 300 0 50 100 150 200 250 300 times(s) temperature( ) max. 120s max. 100s max. 30s max. ramp up 3 /s max. ramp down 6 /s 217 240 255 245 max. 260
datasheet smd ? side view leds 57 - 1 1 - ghc - r1u2v1a7e - bt8 - am 9 copyright ? 2010, everlight americas all rights reserved. release date : apr.30.2014. issue no: xxxxxxx www.everlight americas .com 2. current limiting a resistor should be used to limit current spikes that can be caused by voltage fluctuations. otherwise damage could occur. 3. storage 3.1 moisture proof bag should only be opened immediately prior to usage. 3.2 environment should be les s than 30 and 60% rh when moisture proof bag is opened. 3.3 after opening the package msl conditions stated on page 1 of this spec should not be exceeded. 3.4 if the moisture sensitivity card indicates higher than acceptable moisture, the component shoul d be baked at min. 60deg +/ - 5deg for 24 hours. 4. iron soldering hand soldering is not recommended for regular production. these guidelines are for rework only. soldering iron tip should contact each terminal no more than 3 sec at 350 , using solderi ng iron with nominal power less than 25w. allow min. 2 sec. between soldering intervals. 5. usage do not exceed the values given in this specification.
|
